RAPIDROLL® OUTDOOR PORTABLE BARRIER SYSTEM

A temporary visual barrier where you need it, when you need it.

EASY TO CARRY | WORKSITE DURABLE | SAFE AND STURDY | ONE PERSON SETUP

INDOOR portable barrier system

Portable Zone Safety

 

  • RapidRoll™ can be used over and over again, making the cost per use much more affordable than traditional construction fencing.
  • At a cartridge weight of only 28 lbs. (12.7 kgs), RapidRoll™ can easily be carried and assembled by one person in minutes.
  • With 50 feet (15 m) of fencing and the four post/base system, RapidRoll™ cannot be walked through delivering a more effective barrier than pylons or caution tape.  If more protection is needed, multiple units can easily be hooked together.
  • Available with a 3-legged base or a Wheeled base for extra mobility on flat surfaces.

TECHNICAL INFORMATION

PRODUCT INFORMATION:

Molded with tough, resilient MDPE to ensure it will stand up to all the rigors a worksite and extreme weather conditions can throw at it.
Suitable for indoor and outdoor applications.
Patent pending design.

 

3-LEGGED SYSTEM:

  • Includes 50’ (15 m) safety orange fencing, 4 posts with end lockout in a post carry bag, 4 rubber base pads and a steel cartridge base.
  • Cartridge Size: 11” diameter (279mm) x 57.5” (1461mm) high, weighing 28 lbs. (12.7 kg)
  • Approximate Total System Weight: 183 lbs. (83kg)
  • Skidded Shipping Weight: 207 lbs. (94kg)

 

WHEELED SYSTEM:

  • Best suited for use on flat surfaces.
  • Includes 50’ (15 m) safety orange fencing, 4 posts with end lockout and 4 rubber base pads all stored in a wheeled base.
  • Overall Size: 31” (787mm) wide x 22” (559mm) deep x 64” (1626mm) high
  • Approximate Total System Weight: 215 lbs. (98kg)
  • Skidded Shipping Weight: 239 lbs. (108kg)
  •  

Rapid Roll is a possible solution to satisfy this OSHA regulation: 1910.212(a)(1).

One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.*
*Each situation should be professionally evaluated for relevance.

PRODUCT GALLERY